moving blade
英 [ˈmuːvɪŋ bleɪd]
美 [ˈmuːvɪŋ bleɪd]
动叶片
双语例句
- When working on a Table Saw, Miter Saw, etc., never put your hands anywhere near the moving blade, especially when attempting to remove waste or cut-offs.
正在使用台锯或斜切锯的时候，不要将手刀片附近，更不要用手去清理刀具旁的碎屑。 - Relationship Between Forward-swept Angles of Moving Blade and Aerodynamic Performance of Small-size Axial-flow Fans
动叶前掠角与小型轴流风扇气动性能的关系 - Transverse moving blade shaper Automatic horizontal-feeding and rapid motion can be obtained by the slide carriage of the machine.
机床滑座能横向自动进给和快速移动。 - Transverse moving blade shaper
横向移动刮刀式整形机 - Transverse moving blade shaper Dynamics simulation analysis on hand clamp equipment of automatic clamp lateral moving machine
横向移动刮刀式整形机自动抱夹横移机手部抱夹装置的动力学仿真分析 - In order to improve the cold fatigue, hot fatigue and mechanical fatigue resisting performance of the moving blade, grain refinement is required for the casting surface.
为了提高动叶片的抗冷热疲劳和抗机械疲劳的性能，铸件表面需进行晶粒细化。 - This machine is designed for human sensitive material with the structure of "moving blade wheel water cooling", we are applying this technique for national patent.
该机为人敏性物料设计的动刀盘水冷却结构，正申请国家专利。 - Movable boot scraper of iron or steel transverse moving blade shaper
钢或铁制活动的刮靴刀横向移动刮刀式整形机 - The effort analysis of moving blade on chopper
青饲切碎机动刀片刃口的受力分析 - The paper also briefs the nozzle or moving blade surface hardening treatment technology, including plasma spraying and diffusion layer for preventing the nozzle and moving blade from SPE.
文章还介绍了为预防汽轮机喷嘴和动叶片免受固体颗粒侵蚀所采用的表面硬化处理技术，包括等离子喷涂层和扩散渗层在内； - Therefore, he recommends to machine these blades with sharp edges of conical milling cutter moving along the generators on blade surface, so to reduce machining error to a minimum.
建议采用刀具尖刃沿叶片面母线移动的方式来加工叶轮，可以使加工误差大大减少。 - A Study on the Moving Orbit of the Robot's Arms for the Repair of a Francis Turbine Blade on-the-spot
混流式水轮机叶片现场修形机器人运动轨迹的研究 - The Study on Rotor of the Moving Blade of Running Fanner
在旋转中动叶可调的通风机转子系统的研究 - New Material of Turbine Moving Blade Intensified by Electrical Spark
汽轮机动叶片新材料的电火花强化 - Study of Water-erosion Characteristics and Fatigue Crack Propagation of Last Stage Moving Blade Trailing Edge of a Steam Turbine
汽轮机末级动叶片出口边水蚀特性及疲劳裂纹扩展的研究 - The NC machining technique of five axes simultaneous moving, it's application in machining blade and developing of the high efficiency tool system are introduced.
介绍了五轴联动数控技术、叶片加工工艺方法和高效刀具系统的开发应用。 - In the process of pulp consistency control, digital PID regulating will bring serious lag effect, because of the transmission lag, the actuator's inertia, especially the long sampling period of the moving blade consistency transmitter. It's difficult to achieve satisfactory result.
在纸浆浓度调节中，由于传输滞后及执行器的惯性，尤其是动刀式浓度变送器采样周期长，采用数字PID调节将产生严重的滞后效应，难以收到令人满意的结果。 - Prediction of Shrinkage Defects in a Third Class Moving Turbine Blade by Invested Casting
精密铸造三级动叶片缩松和缩孔缺陷的预测 - On the other hand, the moving situation of blade and the relative motion between blade and lashing wire under impulse load for different revolution speed can be obtained. This conclusion will be helpful in researching the damping characteristics of loose lashing wire blade.
另一方面，得到了在不同转速下叶片在脉冲激励下的运动情况以及叶片与拉金相对运动的情况，这对研究松拉金成组叶片的阻尼机理是很有帮助的。 - Simulation of Moving/ Stationary Blade Interaction for Unsteady Flow Using Sliding Interface Technique
应用滑移界面方法求解动/静相干叶排内非定常流动 - The research is an important meaning for designing moving blade and researching wear rule on chopper.
这项工作对动刀片刃口形状的设计和磨损规律的研究具有一定的指导意义。 - With the analysis and calculation of metallurgic fan machinery flow fluid, the precise 3D model is built. The moving traces of different particles and the blade wearing status are simulated and the relative faults samples are acquired. 6.
通过对冶金风机流场的分析计算，建立了精确的三维模型，模拟了不同颗粒在叶轮中的运动轨迹和叶片磨损状况，获得了相关的故障样本。 - The change of clocking position makes disturbance into a useful superposition, which can reduce flow loss of the moving blade surface and improve the aerodynamic efficiency.
时序位置的改变，会使扰动产生有益迭加，从而减小了动叶表面的流动损失，从而实现气动效率的提高。